+86-13776829398

Home
 / HDMI Wall Plate Installation Made Easy: A Step-by-Step Guide to Upgrade Your AV System

PRODUCTS

HDMI Wall Plate Installation Made Easy: A Step-by-Step Guide to Upgrade Your AV System

There are several ways to upgrade your audio/video system, one of which is to install an HDMI wall plate. Wall plates allow you to install your TV or projector more neatly, easily and efficiently. For reference, here are the steps to install an HDMI wall plate:

1. Determine the location: Determine the location where you intend to install the HDMI wall plate. Choose a location that is close enough to the TV or projector but not affected by radiators or other objects to ensure a stable signal and that it will not cause interference.

2. Prep work: Next, you will need to prepare tools and materials such as wall plates, drills, wrenches, screwdrivers, wires, and wall sleeves.

3. Find the hole: Place the bottom of the wall plate in the agreed location and use a pen or pencil to mark the location of the mounting screws. Drill a small hole in the hole to make it easier to align later nails.

4. Installation: Place the jack plate into the sleeve and secure it with a screwdriver or wrench. Next, plug in the HDMI cable in the socket.

5. Fix: Connect all the cables that need to be connected and gently secure the individual connectors on the plug board. Then use the screws to secure the jack board again.

6. Test: When finished, connect a TV or projector to make sure the system is set up correctly.

The above steps will allow you to successfully install the HDMI wall plate. More tips on how to hide cables and other devices need to be determined on a case-by-case basis, and you can operate flexibly on this basis.

Request A Quote​

Can’t find the specific information you’re looking for? Have a question ? Contact Us