Installing an HDMI extender wall plate is a simple process that can be done in just a few steps. Here’s a step-by-step guide to help you get started:
1. Choose the right location: Before you begin, choose a location for your HDMI extender wall plate that is easily accessible and within reach of your TV or other device.
2. Turn off power: Make sure to turn off the power to your TV or other device before beginning the installation process.
3. Remove cover plate: Use a screwdriver to remove the cover plate from the wall outlet where you will be installing the HDMI extender wall plate.
4. Connect HDMI cable: Connect one end of the HDMI cable to the HDMI output port on your TV or other device, and the other end to the input port on the HDMI extender wall plate.
5. Connect power: Connect the power adapter to the HDMI extender wall plate and plug it into a nearby wall outlet.
6. Install wall plate: Screw the HDMI extender wall plate into the wall outlet using the screws provided.
7. Turn on power: Turn on the power to your TV or other device and adjust the settings as needed.
That’s it! Your HDMI extender wall plate should now be installed and ready to use. Remember to always follow the manufacturer’s instructions for your specific device to ensure proper installation and operation.