– Wall plate brush
– Installing screws
1. Locate the area where you want to install the wall plate brush.
2. Ensure that the space is clean and free from any debris.
3. Remove the existing wall plate cover from the electric socket.
4. Align the wall plate brush on top of the electric socket and ensure that the brush’s holes are over the socket’s plugs.
5. Insert the installing screws into the screw holes of the wall plate brush.
6. Securely tighten the screws using a screwdriver.
7. Ensure that the wall plate brush is tightly in place.
8. Replace the wall plate cover over the wall plate brush.
9. Ensure the cover is tightly attached, and the brush is in place.
Note: Ensure that the power to the socket is turned off before installation, to avoid electrical hazards.